|本期目录/Table of Contents|

[1]池汝安,陈志伟,路莎莎.负极材料四氧化三钴的液相沉淀法制备及其性能[J].武汉工程大学学报,2014,(04):7-11.[doi:103969/jissn16742869201404002]
 CHI Ru an,CHEN Zhi wei,LU Sha sha.Preparation and characterization of cobalt oxide anode materials synthesized by liquid precipitation method[J].Journal of Wuhan Institute of Technology,2014,(04):7-11.[doi:103969/jissn16742869201404002]
点击复制

负极材料四氧化三钴的液相沉淀法制备及其性能(/HTML)
分享到:

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2014年04期
页码:
7-11
栏目:
化学与化学工程
出版日期:
2014-04-30

文章信息/Info

Title:
Preparation and characterization of cobalt oxide anode materials synthesized by liquid precipitation method
文章编号:
16742869(2014)04000705
作者:
池汝安12陈志伟12路莎莎3
1.武汉工程大学化工与制药学院,湖北 武汉430074;2.绿色化工过程教育部重点实验室(武汉工程大学),湖北 武汉430074;3.清华大学核能与新能源技术研究院,北京100084\
Author(s):
CHI Ruan12CHEN Zhiwei12LU Shasha3
1.School of Chemical Engineering and Pharmacy,Wuhan Institute of Technology,Wuhan 430074,China;2.Key Laboratory for Green Chemical Process of Ministry of Education(Wuhan Institute of Technology),Wuhan 430074,China;3.Institute of Nuclear and New Energy Technology,Tsinghua University,Beijing 100084,China\
关键词:
四氧化三钴负极材料液相沉淀电化学性能
Keywords:
cobalt oxide anode materialsliquid precipitation methodelectrochemical performance
分类号:
TM 912.9
DOI:
103969/jissn16742869201404002
文献标志码:
A
摘要:
为合成性能良好的负极材料四氧化三钴, 用硫酸钴作为钴源,氢氧化钠做沉淀剂,聚乙烯吡络烷酮(PVP)为表面活性剂,利用液相沉淀法合成了粒度均匀的四氧化三钴颗粒; 对钴盐浓度、PVP用量和煅烧温度等参数进行考查并对其电化学性能进行了表征.结果表明:当钴盐浓度为0.5 mol/L,PVP用为50%(质量分数)时,可获得分散均匀, 形貌良好的氢氧化钴颗粒;在煅烧温度为700 ℃时,可以获得纯净的粒径为3 μm左右的片状四氧化三钴晶体颗粒.充放电实验表明,该材料在2V附近有放电平台,首次放电比容量可以达到1 500 mAh/g,且在循环15次后,容量保持率在90%以上.
Abstract:
To make excellent performance cobalt oxide anode materials,the cobalt oxide was synthesized by liquid precipitation method using cobalt sulfate as cobalt source and hydroxide as precipitant.The chemical properties of concentration of cobalt sulfate solution,the mount of PolyVinyl Pyrrolidone (PVP)and calcining temperature were characterized.And the electrochemical performance of synthesized materials was characterized by electrochemical performance measurement.Results show that cobalt hydroxide with uniform particle size distribution is obtained when the concentration of cobalt sulfate solution is 0.2 mol/L and PVP is 50%; the sheetlike cobalt oxide is obtained at calcining temperature of 700 ℃ and its size is about 3 μm.The initial discharge capacity of the cobalt oxide is 1 500 mAh/g and the discharge capacity rethtion ratio is above 90% after 15 cycles.

参考文献/References:

[1]LIU Hanchang, YEN Shiowkang. Characterization of electrolytic Co3O4 thin films as anodes for lithiumion batteries[J].Journal of Power Sources,2007,166:478484.[2]WANG G X,CHEN Y,KONSTANTINOV K,et al.Investigation of cobalt oxides as anode materials for Liion batteries[J].Power Sources,2002,109:142147.[3]YANG H,HU Y,ZHANG X,et al.Mechanochemical synthesis of cobalt oxide nanoparticles\[J\].Mater Lett,2004,58:387389.[4]ZHANG Hui,WU Jianbo,ZHAI Chuanxin,et al.From cobalt nitrate carbonate hydroxide hydrate nanowires to porous Co3O4 nanorods for high performance lithiumion battery electrodes[J].Nanotechnology,2008,19:035711035715.[5]YU T,ZHU Y W,XU X J,et al.Controlled growth and fieldemission properties of cobalt oxide nanowalls[J].Adv Mater,2005,17:15951599.[6]NAM K T,KIM D W,et al.Virusenabled synthesis and assembly of nanowires for lithium ion battery electrodes[J].Science,2006,312:885888.[7]OH S W,BANG H J,SUN Y K.Effect of calcination temperature on morphology,crystallinityand electrochemical properties of nanocrystalline metal oxides (Co3O4,CuO,and NiO) prepared via ultrasonic spray pyrolysis[J].Power Sources,2007,173:502509.[8]刘宇慧,汪礼敏,张景怀.液相沉淀法制备超细Co3O4粉体的研究[J]. 粉末冶金工业,2007,17(4):1418.LIU Yuhui,WANG Limin,ZHANG Jinghuai.Research on preparation of ultrafine Co3O4powder by liquid precipitation[J].Powder Metallurgyindustry,2007,17(4):1418.(in Chinese)[9]粱世强,廖列文,尹国强,等.均匀沉淀法合成纳米四氧化三钴工艺优化[J].无机盐工业,2006,38(7):2124.LIANG Shiqiang,LIAO Liewen,YIN Guoqiang,et al.Optim ization of preparing Co3O4 nano particles by homogeneous precipitation[J].Inorganicchemicals Industry,2006,38(7):2124.(in Chinese)[10]李亚栋,贺蕴普,李龙泉,等.液相控制沉淀法制备纳米级Co3O4微粉[J].高等学校化学学报,1999,20(4):519522.LI Yadong,HE Yunpu,LI Longquan,et al.Fabrication of Co3O4 ultrafines by a liquidcontrolprecipitation method[J].Chemical Journal of Chinese Univers ITIES,1999,20(4):519522.(in Chinese)[11]侯相钰,冯静,刘晓寒,等.草酸沉淀法合成自组装纳米Co3O4及性质[J].无机化肇学报,2010,26(3):525528.HOU Xiangyu,FENGJing,LIU Xiaohan,et al.Synthesis and characterizations of selfassembled nano Co3O4 by oxalateprecipitation method[J].Chinese Journal of Inorganic Chemistry,2010,26(3):525528.(in Chinese)[12]郑兴芳,郭成花,张军.等.四氧化三钴粉末的沉淀法制备及表征[J].光谱实验室,2012,29(3):18381840.ZHENG Xingfang,GUO Chenghua,ZHANG Jun,et al.Preparation and characterization of cobal tosic oxide powderby precipitation method[J].Chinese Journal of Spectroscopy Laboratory,2012,29(3):18381840.

相似文献/References:

[1]刘丹阳,王升高*,马 元,等.泡沫碳@SnO2复合材料的制备及电化学性能[J].武汉工程大学学报,2020,42(03):307.[doi:10.19843/j.cnki.CN42-1779/TQ.201912008]
 LIU Danyang,WANG Shenggao*,MA Yuan,et al.Preparation and Electrochemical Performances of Carbon Foam@SnO2 Composites[J].Journal of Wuhan Institute of Technology,2020,42(04):307.[doi:10.19843/j.cnki.CN42-1779/TQ.201912008]
[2]李 剑,杨 凯,江秋月,等.聚丙烯酸黏结剂的分子量对氧化亚硅负极性能的影响[J].武汉工程大学学报,2023,45(06):635.[doi:10.19843/j.cnki.CN42-1779/TQ.202212004]
 LI Jian,YANG Kai,JIANG Qiuyue,et al.Effect of Molecular Weight of Polyacrylic Acid Binders onProperties of Silicon Suboxide Anode[J].Journal of Wuhan Institute of Technology,2023,45(04):635.[doi:10.19843/j.cnki.CN42-1779/TQ.202212004]
[3]邓淏天,王学华*,石胜伟,等.锌溴电池电解液及电极材料研究进展[J].武汉工程大学学报,2024,46(01):27.[doi:10.19843/j.cnki.CN42-1779/TQ.202304009]
 DENG Haotian,WANG Xuehua*,SHI Shengwei,et al.Research progress in electrolyte and electrode materials forzinc-bromine batteries[J].Journal of Wuhan Institute of Technology,2024,46(04):27.[doi:10.19843/j.cnki.CN42-1779/TQ.202304009]

备注/Memo

备注/Memo:
收稿日期:20140313基金项目:国家重点实验室基金(SKLSPM201211)作者简介:池汝安(1959),男,福建三明人,教授,博士,博士研究生导师.研究方向:矿物加工、分离工程.
更新日期/Last Update: 2014-05-15