[1] MASAD Eyad, TASHMAN Laith, SOMEDAVAN Niranjanan, et al. Micromechanics?鄄based analysis of stiffness anisotropy in asphalt mixtures[J]. Journal of Materials in Civil Engineering, 2002,14(5):374-383.[2] UNDERWOOD Shane,HEIDARI A H, Guddati Murthy, et al. Experimental investigation of anisotropy in asphalt concrete[J]. Transportation research record journal of the Transportation Research Board, 2005,1929(1):238-247.[3] SEYHAN U, TUTUMLUER Erol. Anisotropic Modular ratios as unbound aggregate performance indicators[J]. Journal of Materials in Civil Engineering, 2002,14(5):409-416.[4] 胡小弟. 轮胎接地压力分布实测及沥青路面力学响应分析[D]. 上海:同济大学, 2003.HU Xiao?鄄di. The tire ground pressure distri?鄄bution measurement and the mechanical response analysis of asphalt pavement[D]. Shanghai:Tongji University, 2003. (in chineses)[5] 沈观林,胡更开. 复合材料力学[M]. 北京:清华大学出版社, 2006.SHEN Guan-lin, Hu Geng-kai. Mechanics of composites materials[M]. Beijing: Tsinghua University Publishing, 2006. (in chineses)[6] DE Beer M, Fisher C, Jooste F J. Determination of pneumatic tyre/Pavement interface contact pressurees under moving loads and some effects on pavements with thin asphalt surfacing layers[C]//Proceedings of the Eighth International Conference on Asphalt Pavements.1997(1):179-227.[7] LOULIZI A, Al-Qadi I L, Lahouar S, et al. Measurement of vertical compressive stress pulse in flexible pavements:representation for dynamic loading tests[J]. Transportation Research Record: Journal of the Transportation Research Bo-ard, 2002,1816(1):125-136.[8] Al-QADI I L, YOO P J. Effect of surface tangential contact pressure on flexible pavement response[J]. Journal of the association of asphalt paving technologists, 2007(76):663-692.[9] 中华人民共和国行业标准(JTG D50-2006).公路沥青路面设计规程[S]. 北京:人民交通出版社, 2006.Industry Criterion of the People's Republic of China (JTG D50-2006). Design rules of asphalt pavement for highway engineering[S]. Beijing: People Traffic Publishing, 2006. (in chineses)[10] UZAN J. Characterization of granular material[J]. Transportation Research Record,1985:10-22. [11] UZAN J. Resilient characterization of pavement Materials[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1992,16(6):453-459.[12] WANG L, HOYOS L R, WANG J, et al. Anisotropic properties of asphalt concrete: characterization and implications for pavement design and analysis[J]. Journal of Materials in Civil Engineering, 2005,17(5):535-543.[13] APARICIO RAMOS S I. Study of the asphalt pavement damage through nondestructive testing on overweight truck routes[D]. Texas: Master’s thesis, Texas A&M University, College Station, 2003.[14] OH J H, LYTTON R L, FERNANDO E G. Modeling of pavement response using nonlinear cross-anisotropy approach[J]. Journal of Transportation Engineering, 2006, 132(6): 458-468.[15] 鞠达.沥青混凝土材料的各向异性及其对路面结构受力的影响[D]. 南京:东南大学, 2011.JU da. Anisotropy of asphalt concrete and the influence in pavement [D]. Nanjing:Southeast University, 2011.(in chineses)
[1]艾 畅,阳 汉,吴冷雷,等.剑麻纤维对高模量沥青混合料低温性能的改善[J].武汉工程大学学报,2017,39(01):69.[doi:10. 3969/j. issn. 1674?2869. 2017. 01. 012]
AI Chang,YANG Han,WU Lenglei,et al.Improvement of Low Temperature Performance of High Modulus Asphalt Mixture by Sisal Fiber[J].Journal of Wuhan Institute of Technology,2017,39(04):69.[doi:10. 3969/j. issn. 1674?2869. 2017. 01. 012]
[2]屠艳平,陈国夫,徐 雄*,等.再生混凝土微粉对沥青及沥青混合料性能的影响[J].武汉工程大学学报,2023,45(03):349.[doi:10.19843/j.cnki.CN42-1779/TQ.202109007]
TU Yanping,CHEN Guofu,XU Xiong*,et al.Influence of Recycled Cement Powder on Performance ofAsphalt and Its Mixture[J].Journal of Wuhan Institute of Technology,2023,45(04):349.[doi:10.19843/j.cnki.CN42-1779/TQ.202109007]