|本期目录/Table of Contents|

[1]林 纬,詹宏阳,汪 威,等.基于响应面法和灰色关联法的新型螺纹管传热性能优化研究[J].武汉工程大学学报,2025,47(01):85-92.[doi:10.19843/j.cnki.CN42-1779/TQ.202401022]
　LIN Wei,ZHAN Hongyang,WANG Wei,et al.Optimization of heat transfer performance of a novel threaded tube based on response surface methodology and grey relational analysis[J].Journal of Wuhan Institute of Technology,2025,47(01):85-92.[doi:10.19843/j.cnki.CN42-1779/TQ.202401022]
点击复制

基于响应面法和灰色关联法的新型螺纹管传热性能优化研究
(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
47
期数:
2025年01期
页码:
85-92
栏目:
机电与信息工程
出版日期:
2025-02-28

文章信息/Info

Title:
Optimization of heat transfer performance of a novel threaded tube based on response surface methodology and grey relational analysis
文章编号:
1674 - 2869（2025）01 - 0085 - 08
作者:
1. 武汉工程大学机电工程学院，湖北 武汉 430205；
2. 化工装备强化与本质安全湖北省重点实验室，湖北 武汉 430205

Author(s):
1. School of Mechanical and Electrical Engineering， Wuhan Institute of Technology， Wuhan 430205， China；
2. Hubei Provincial Key Laboratory of Chemical Equipment Intensification and Intrinsic Safety， Wuhan 430205， China
关键词:
Keywords:
分类号:
TK124
DOI:
10.19843/j.cnki.CN42-1779/TQ.202401022
文献标志码:
A
摘要:
采用响应面法中的Box-Behnken法对新型螺纹管传热性能的优化进行实验设计，以努塞特数（Nu）和摩擦因数（f）为评价指标，研究螺距（P）、肋高（H）、螺纹段与光管段的长度比（L）对传热性能的影响，同时通过分析响应面图研究各参数对Nu和f的交互影响。计算各实验组数的灰色关联等级，使用灰色关联法对新型螺纹管进行多目标优化，并通过分析不同换热管的湍流动能（TKE）分布，得到新型螺纹管增强传热性能的机理。研究表明：通过响应面分析可知L是影响Nu与f最显著的参数；通过灰色关联法分析得到的最优结构参数P= 5.5 mm、H=1.00 mm、L=2，这种结构参数下的新型螺纹管Nu值为100.741，f值为0.024 641；通过对比不同换热管的TKE分布发现，新型螺纹管的独特设计即两个旋转方向相反的相邻螺纹段会导致管内的流体流动方向频繁变化，从而加剧径向扰动，更频繁地产生二次流，导致TKE增加，增强其传热性能。通过优化研究，确定了新型螺纹管最优的结构参数，并深入揭示其传热性能增强的机制，为进一步优化和设计新型螺纹管提供了指导和依据。
Abstract:
To optimize the heat transfer performance of a novel threaded tube， an experimental design was developed utilizing the Box-Behnken method within the framework of response surface methodology. The investigation focused on assessing the impacts of pitch （P）， rib height （H）， and the length ratio of the threaded section to the smooth section（L） on heat transfer using Nusselt number （Nu） and friction factor （f） as performance criteria. Through response surface analysis， the interplay between these parameters and Nu and f was examined. Furthermore， grey relational analysis was conducted to evaluate the experimental groups， and multi-objective optimization was performed using the grey relational method to enhance the heat transfer efficiency of the novel threaded tube. The findings from response surface analysis highlighted L as the most significant parameter affecting Nu and f. By employing the grey relational method with optimized structural parameters （P = 5.5 mm， H = 1.00 mm， L = 2）， the Nu value of the novel threaded tube was determined to be 100.741， accompanied by an f value of 0.024 641. An analysis of turbulent kinetic energy （TKE） distributions across three distinct types of heat-exchange tubes revealed that the unique design of the novel threaded tube， featuring adjacent threaded section with opposing rotation directions， induced frequent alterations in fluid flow direction within the tube. This resulted in heightened radial disturbances， increased secondary flows， elevated TKE levels， and ultimately improved heat transfer performance. By identifying the optimal structural parameters for the novel threaded tube， a comprehensive understanding of the mechanisms driving its enhanced heat transfer performance was achieved. These insights serve as a basis for future optimization and design refinements of novel threaded tubes， offering valuable guidance for further research endeavors in this field.

参考文献/References:

［1］ LIU S， SAKR M. A comprehensive review on passive heat transfer enhancements in pipe exchangers ［J］. Renewable and Sustainable Energy Reviews， 2013， 19：64-81.
［2］ GNANAVEL C， SARAVANAN R， CHANDRASEK-ARAN M. Heat transfer augmentation by nano-fluids and circular fin insert in double tube heat exchanger—a numerical exploration ［J］. Materials Today： Proceedings， 2020， 21（Part 1）： 934-939.
［3］ LI J J， CHEN J Y， CHEN Y. Effectiveness of actively adjusting vapour-liquid in the evaporator for heat transfer enhancement ［J］. Applied Thermal Engineering， 2022， 200：117696.
［4］ SUN M， ZENG M. Investigation on turbulent flow and heat transfer characteristics and technical economy of corrugated tube ［J］. Applied Thermal Engineering， 2018， 129：1-11.
［5］ 陈鑫，王维，李炳熙，等.非对称波节管换热和阻力性能的实验研究［J］.工程热物理学报，2020，41（7）：1797-1807.
［6］ 徐建民，曾凯，李智勇，等.波纹管传热性能与污垢特性实验［J］.武汉工程大学学报，2014，36（6）：64-67.
［7］ WANG Y H， ZHANG J L， MA Z X. Experimental determination of single-phase pressure drop and heat transfer in a horizontal internal helically-finned tube ［J］. International Journal of Heat and Mass Transfer， 2017， 104：240-246.
［8］ 张娟，陈海峰，谢宵虎，等.对排凸胞换热管内传热分析及多目标优化［J］.热能动力工程，2020，35（3）：138-144.
［9］ 刘爽，周杰.三维内肋管紊流换热和阻力特性的试验研究［J］.建筑节能，2017，45（8）：88-90.
［10］ 靳遵龙，赵金阳，王永庆.螺旋内肋管换热及流体流动数值研究［J］.郑州大学学报（工学版），2014，35（4）：41-44.
［11］ HAN H Z， LI B X， SHAO W. Multi-objective optimization of outward convex corrugated tubes using response surface methodology ［J］. Applied Thermal Engineering， 2014， 70（1）： 250-262.
［12］ XIE C G， YAN G X， MA Q， et al. Flow and heat transfer optimization of a fin-tube heat exchanger with vortex generators using response surface methodology and artificial neural network ［J］. Case Studies in Thermal Engineering， 2022， 39：102445.
［13］ 李永华， 何仑， 张莎，等.多向扰流换热管管内传热与流动特性数值模拟［J］.电力科学与工程，2019，35（6）：71-78.
［14］ DAGDEVIR T， OZCEYHAN V. Optimization of process parameters in terms of stabilization and thermal conductivity on water based TiO2 nanofluid preparation by using Taguchi method and grey relation analysis ［J］. International Communications in Heat and Mass Transfer， 2021， 120：105047.
［15］ NAQIUDDIN N H， SAW L H， YEW M C， et al. Numerical investigation for optimizing segmented micro-channel heat sink by Taguchi-grey method ［J］. Applied Energy， 2018， 222：437-450.
［16］ KIRKAR S M， G?NüL A， CELEN A， er al. Multi-objective optimization of single-phase flow heat transfer characteristics in corrugated tubes ［J］. International Journal of Thermal Sciences， 2023， 186：108119.
［17］ YANG P， ZHANG H W， ZHENG Y Y， et al. Investigation and optimization of heat transfer performance of a spirally corrugated tube using the Taguchi method ［J］. International Communications in Heat and Mass Transfer， 2021， 127：105577.


相似文献/References:

备注/Memo

备注/Memo:
收稿日期：2024-01-26
基金项目：国家自然科学基金（52205167）；武汉工程大学科学研究基金（K2021020）
作者简介：林 纬，博士，副教授。Email：[email protected]
*通信作者：龚 程，博士，讲师。 Email：[email protected]
引文格式：林纬，詹宏阳，汪威，等. 基于响应面法和灰色关联法的新型螺纹管传热性能优化研究［J］. 武汉工程大学学报，2025，47（1）：85-92.
更新日期/Last Update: 2025-03-17